The TS1814 uses an external multi-sensor paired with a countdown timer to save energy. If no infrared (IR) remote-control signals or motion are detected in the TV room through the duration of the countdown timer, the Advanced+ Energy Saving Surge Protector will remove power to the TV/control outlet and 2-switched outlets. One always-on outlet always has power supplied to it. Ten minutes prior to removing power to any outlets, the unit will flash an LED warning light and sound a soft chirp warning. To cancel the shutdown event and reset the countdown timer, press any button on an infrared remote control or wave to the multi-sensor (initiate movement). This removes all phantom or vampire power from connected devices while they are off and unused. Saving energy saves money from your utility bill. To turn the TV system back on, power must first be restored to the TS1814 units control and switched outlets. Simply send the TS1814 any IR command from your remote to turn it on. Next, use your IR remote to power on the TV like normal. Mount the multi-sensor to the TV near the TVs own infrared sensor and facing the TV room. The default countdown timer setting is 75 minutes; it can be set to either 135 minutes or 8-hour for music mode. Plug devices that always need power such as set-top boxes or digital video recorders into the always-on outlets. Plug the TV into the control outlet. Plug devices that can have power safely removed from them into the switched outlets.
Intelligent switching capability saves money by saving energy from turning off unused electronic devices in your home TV system.
External multi-sensor used to detect user engagement looks for both infrared remote-control signal and motion in the TV room to ensure compatibility with all types of electronic devices.
Slim design plugs directly into the wall outlet for a safe and secure connection that saves space.
1 always on outlets, 1-control outlet and 2-switched outlets
Ceramic-encased metal oxide varistors provide premium-quality, FIREPROOF surge protection.
Contains a resettable circuit breaker, which can be used as a master ON/OFF switch.
1,080-joules of surge protection with 500-Volt Voltage Protection Rating (VPR).
LED status indicators for surge protection, ground status and switched outlet status.
Automatically adjustable threshold and RMS advanced power analysis ensure compatibility with all types of TVs.
Programmable countdown timer with settings of 75 minutes/135 minutes and default setting of 75 minutes.
Dual notification system to alert users of approaching TV shutdown event: a flashing LED light and an audible buzzer/chirp both activate ten minutes prior to shutdown.
Listed to UL 1449 and UL 498A standards to ensure performance and safety.
1 always-on outlets (1 transformer-spaced outlet)
3 switched outlets (1 transformer-spaced outlet)
Resettable circuit breaker
1,080 Joules of surge protection at 500 VPR
Ceramic-encased, fireproof surge protection
Consumes <1 Watt at all times
Power switching electromechanical relays rated for 100,000 switching cycles at a full 15 amp load.
Software and hardware filtering technology filters out IR interference from non-AV equipment.
LED status indication (ground, surge status, switched)
<40 dB noise filtering
Low-profile, wall-mount design
Includes a receptacle wall-mounting screw for more permanent applications.
Supports high-level Consumer Electronic Control (CEC) commands via optional TAV-LinkTM cable (sold seperately) that connects from the Multi-sensor to an HDMI port on the TV.
APS + ELECTRICAL SPECIFICATIONS:
FOR INDOOR USE
Voltage: 120 VAC +/- 10%, 60 Hz Power Rating: 15 A Surge Protection: 72,000 Amps/1,080 Joules Noise Filtering: <40 dB Standby Power Consumption: <1 Watt Voltage Protection Rating: L-N 500V L-G 500V N-G 500V
Operating Temperature: 32° to 113° F Storage Temperature: 14° to 140° F Humidity: 5 to 90% N/C IP Rating: IP20
SENSOR ELECTRICAL SPECIFICATIONS:
FOR INDOOR USE
Voltage: 3.3 V IR Detection Range: Up to 16.4 ft. IR Detection Angle: 60° Cord Length: 8 ft. Movement Detection Range: Up to 16.4 ft. Movement Detection Angle: 90°